基于气动性能与刚度特性的风力机翼型优化设计

结合翼型泛函集成理论与叶片截面刚度矩阵数学计算模型,提出了风力机中等厚度翼型气动性能与结构刚度特性的一体化设计方法,实现了翼型气动性能与叶片截面刚度特性的同时提高。对考虑叶片截面铺层参数变化设计的WQ-B300翼型与DU97-W-300翼型进行了气动性能与结构刚度特性对比分析,结果表明:相比于DU97-W-300翼型,WQ-B300翼型的气动性能与叶片截面刚度性能均有显著提高,其挥舞刚度和摆振刚度分别提高了6.2%和8.4%,验证了该设计方法的可行性,给风力机中等厚度及大厚度翼型设计提供了一种思路。     

考虑内外啮合相位差的行星轮系动态特性分析

对1.5MW级风电齿轮箱行星轮系统采用集中参数法建立行星轮系扭转动力学模型,运用Runge-Kutta法对所建立的扭转动力学模型进行求解,分别讨论了时变啮合刚度和相位差对行星轮系固有特性和稳态响应特性的影响。研究结果表明:时变啮合刚度导致系统各阶固有频率随时间周期性波动,而啮合相位差导致第1阶固有频率波动范围增大,其余4阶固有频率波动范围变小,且各阶固有频率间的变化步调存在相位差;是否考虑相位差对第3、4阶振型影响较为明显;对不同时刻的第3、4阶振型影响较大;考虑相位差时保持架、行星轮、太阳轮扭振角速度幅值均降低。     

Indentation cracking and deformation mechanism of sodium aluminoborosilicate glasses

Developing less brittle oxide glasses is a grand challenge in the field of glass science and technology, as it would pave the way toward new glass applications and limit the overall raw material usage and energy consumption. However, in order to achieve this goal, more insight into the correlation between the chemical composition and material properties is required. In this work, we focus on the mechanical properties of quaternary sodium aluminoborosilicate glasses, wherein systematic changes in glass chemistry yield different resistances to indentation crack initiation. We discuss the origin of the composition dependence of indentation cracking based on an evaluation of the deformation mechanism taking place during the indentation event. To this end, we use a simple metric, the extent of indent side length recovery upon annealing, to quantify the extent of reversible volume deformation. Finally, we also compare the compositional trend in crack initiation resistance to that in crack growth resistance (fracture toughness), showing no simple correlation among the two.     

Free vibration behavior of a thermally post-buckled FG Timoshenko beam under large deflection using a tangent stiffness-based method

For thermally postbuckled configurations, the free vibration behavior of functionally graded (FG) Timoshenko beams are investigated. The postbuckling configurations are obtained through a geometrically nonlinear static problem. The free vibration problem around the postbuckled configuration is formulated using its tangent stiffness. The energy based governing equations are solved following the Ritz method. The elements of the tangent stiffness matrix are obtained using the Ritz coefficients. The results are shown to exhibit the effects of FG material, material profile parameter, and length-thickness ratio. The comparative results are presented for both the cases of the physical neutral surface and the geometrical neutral surface.     

Strength of brittle materials in moderately corrosive environments

The strengths of four brittle materials―cordierite glass ceramic, fused silica, silicon, and polycrystalline alumina were measured after exposure to weakly corrosive water and moderately corrosive buffered HF (BHF) solution. Exposure to water did not alter the strengths in subsequent inert strength tests and decreased the strengths in reactive strength tests. Exposure to BHF increased the strengths in both tests, but only after an incubation exposure time. Prior to the incubation time, the BHF had the same effect as water, suggesting that the bond rupture kinetics were unaffected. Examination of strength‐controlling indentation flaws after the incubation time showed clear corrosive effects on the flaw geometry indicative of reductions in the indentation residual stress fields. The implication is that moderately corrosive environments increase the strength or lifetime of a brittle component by reducing the crack driving force via flaw alteration and do not, as perhaps expected, decrease the strength or lifetime through enhanced chemical reactivity.     

高速纺纱锭子弹性管减振机制与振动特性

为探究锭子弹性管的减振机制,将其开螺旋槽部分作为矩形弹簧模型处理,建立了减振弹性管的抗弯刚度及底部振幅的理论数学模型,并利用MatLab仿真分析了减振弹性管关键结构参教与其抗弯刚度和底部振动特性的耦合关系,同时结合有限元仿真及模态测试得到弹性管各阶固有频率。研究结果表明:随着槽宽和圈数的增大,刚度降低,底部振幅增加;随着壁厚、螺距、螺旋升角、弹性模量的增大,刚度增加,底部振幅降低;弹性管固有频率和锭子系统共振频率区间一致,且工作频率有效避开了共振频率。     

Characteristics of spherical hydrostatic supporting system for floated inertial platform

This paper presents a novel method to evaluate the characteristics of the spherical hydrostatic supporting system for the floated inertial platform in dynamic environments. This hydrostatic supporting system consists of eight suspension pads fixed on the inner sphere. The force model for each single suspension pad is established. The dynamic equations for the inner sphere are also derived from the geometrical configuration. The stable time and stable deviation of the inner sphere in different dynamic environments are calculated. The results show that the hydrostatic supporting system can make the inner sphere resistant to the vehicle acceleration effectively and omnidirectionally.     

Chain stiffness and chain conformation of poly(α-methylene-γ-butyrolactone) in dilute solutions

The chain stiffness and local chain conformation of atactic poly(α-methylene-γ-butyrolactone) (PMBL), which is a side chain cyclic structural analog of poly(methyl methacrylate) (PMMA), with a weight-average molecular weight (M_w) ranging from 2.8 × 10³ to 2.6 × 10⁶ in N,N-dimethylformamide (DMF) and γ-butyrolactone (GBL) were characterized by size exclusion chromatography with a multi-angle light-scattering detector (SEC-MALS) and synchrotron radiation small-angle X-ray scattering (SAXS). Based on the Kratky-Porod worm-like chain model, the scattering functions and the M_w dependence of z-average root-mean-square radius of gyration <S²>_z^1/2 yielded the Kuhn segment lengths λ⁻¹, the diameter of the PMBL chains d, and the excluded-volume strengths in DMF and GBL. The local conformation of atactic PMBL in DMF and GBL were slightly larger than those of atactic PMMA, due to the presence of the conformationally rigid lactone ring structure.     

硫化工艺对轴箱弹簧硫化内压及性能的影响

以轴箱弹簧产品为例,研究了填胶量及硫化温度对轴箱弹簧的硫化内压以及刚度等性能的影响。结果表明,随着填胶量的增加,硫化内压增大,橡胶的交联程度及致密度增大,产品刚度增大;随着硫化温度的升高,硫化内压先迅速增大后有所降低,对产品的刚度影响不明显。